US Prices >
SmartShutter™
US Prices. International prices are 5% higher.
Prices subject to change without notice. |
IQ12-SA
12.5mm SmartShutter™ with stand-alone housing |
$ 995 |
IQ25-SA1
25mm SmartShutter™ with stand-alone housing |
$ 1,050 |
IQ25-W2
25mm SmartShutter™ with housing to fit
filter wheel |
$ 1,050 |
IQ25-LS
25mm SmartShutter™ with housing to fit Lambda LS
|
$ 1,100 |
IQ25-DG
25mm SmartShutter™ with housing to fit
Lambda DG-4/DG-5 |
$ 1,450 |
IQ35-W
35mm SmartShutter™ with housing to fit filter wheel |
$ 1,525 |
IQ35-SA
35mm SmartShutter™ with stand-alone housing
|
$ 1,525 |
IQ50-SA3
50mm SmartShutter™ with stand-alone housing
|
$ 1,525 |
1Where vignetting may be an issue, we recommend the 35mm shutter.
2For upgrading a 25mm filter wheel with existing Uniblitz® shutter to SmartShutter.
3Compatible with Lambda SC controller.
|
Controller
US Prices. International prices are 5% higher.
Prices subject to change without notice. |
LB10-B/IQ
Includes one Lambda 10-B control unit, serial and USB cables, power
cable and manual |
$ 1,600 |
LB-SC
Includes one Lambda SC control unit, USB cable, power cord and manual
|
$ 790 |
Cables
& Accessories
US Prices. International prices are 5% higher.
Prices subject to change without notice. |
CIQ-2
One 25 pin connector to two 9 pin connectors (Connects up to 2 stand
alone shutters to controller) |
$ 100
|
W621520
USB cable |
$ 28 |
W621505
9 pin male/female for SmartShutter™ (no wheel) |
$ 28 |
FSWITCH
Foot switch with BNC connector - Changes state of shutter with foot press as long as foot press is maintained |
$ 100 |
FSTOGGLE
Foot switch with BNC connector - Alternates open/close with each foot press |
$ 100 |
Mounting Posts
Stainless steel 1/2 in diameter. One end is 1/4in-20 (M6) tapped hole.
Other end is #8-32 (M4) removable treaded stud. Can be used with 25mm
SmartShutter™ or 35mm when used with the PMA-IQ35.
O620120
1in/25mm long post |
$ 15 |
O620122
1.5in/38mm long post |
$ 15 |
O620123
2 in/50mm long post |
$ 15 |
PMA-IQ35
35mm Post mount adapter |
$ 100 |
Post Holder
O620125
Holder and spring loaded thumbscrew for mounting posts
|
$ 15 |
Post Base Plate
O620140
2in x 3in x 3/8in base plate. Suitable for Imperial or Metric tables,
posts, and post holders |
$ 15 |
Post Collar
O620150
Slip-on collar, 1in OD x 0.5in ID |
$ 15 |
|
