US Prices >
MPC-200 ROE
US Prices. International prices are 5% higher.
Prices subject to change without notice. |
MPC-325
one MP-225 manipulator mechanical, one MPC-200 controller and one
ROE-200. Also includes mounting adapter plate, rod holder, 4in. dovetail
extension, manipulator and ROE connecting cables, power cord and manual.*
|
$ 7,450 |
MPC-385
same as above, but with the MP-285 manipulator mechanical substituted
for the MP-225 mechanical. *
|
$ 8,500 |
MPC-325-2
two MP-225 mechanicals, one MPC-200 controller and one ROE-200. Also
includes 2 sets of all mounting hardware and cables, power cord and
manual. *
|
$ 11,900 |
MPC-385-2
two MP-285 mechanicals, one MPC-200 controller and one ROE-200. Also
includes 2 sets of all mounting hardware and cables, power cord and
manual. *
|
$ 13,900 |
MPC-200-ROE
Consists of the MPC-200 controller and ROE-200. This “system”
is made available at a special price for those who wish to upgrade
previously purchased Sutter manipulators with the newer controller
system or to use the MPC-200-ROE to control other devices. Includes
cable to connect ROE to controller, power cord and manual.
|
$ 3,500 |
* Indicate right- or left-handed set-up
when ordering
* U.S. pricing. International pricing is 5% higher. |
Components
US Prices. International prices are 5% higher.
Prices subject to change without notice. |
MPC-200
Controller box alone. Purchase this if you intend to daisy chain two
controllers to one ROE-200. In this configuration, up to 4 manipulators
can be controlled by a single ROE-200. NOTE: This is not a stand-alone
device. In order to function, the MPC-200 must be connected to a second
MPC-200 with ROE-200 attached or be connected to its own ROE-200.
Includes daisy chain cable, power cord and manual.
|
$ 2,800 |
ROE-200
This is the ROE alone. Provides user input to one or more MPC-200
controllers. This component is intended for users who have an existing
four-manipulator MPC-200 system with
a single ROE-200 and wish to split it into two independent two-manipulator
systems. Includes cable to connect ROE to controller. |
$1,250 |
MP-285/M
The MP-285 manipulator mechanical alone. This is the mechanical from
the MP-285, the manipulator system that made Sutter the world leader
in motorized manipulators for electrophysiology. Over 2000 units,
many of which have been in use over 5 years allow us to stand behind
the reliability of this design. Widely known for its smooth movement
and low drift. Includes mounting adapter plate, rod holder, 4in. dovetail
extension, hinged headstage mount and cable to connect manipulator
to controller.*.
|
$ 5,500 |
MP-225/M
The MP-225 manipulator mechanical alone. This is the mechanical unit
from the Sutter MP-225. It features modular construction, lower cost,
smooth movement and low drift. Includes mounting adapter plate, rod
holder, 4in. dovetail extension, hinged headstage mount and cable
to connect manipulator to controller.*
|
$ 4,750 |
Accessories
US Prices. International prices are 5% higher.
Prices subject to change without notice. |
X285204
4in dovetail extension
|
$ 37 |
X285210*
Mounting adapter plate |
$ 48 |
285RBI
Rotating base for MP-285
|
$ 315 |
225RBI
Rotating base for MP-225
|
$ 315 |
X285300
Right angle adapter
|
$ 48 |
X285305
Z-axis vertical extension |
$ 48 |
X285310
Z-axis horizontal extension
|
$ 48 |
For detailed information on mounting
our micromanipulators, refer to the Mounting Systems section or phone
for assistance.
* For use with MT and MD series stands and platforms, or any surface
with 1 inch centered holes. |
| * Indicate right-
or left-handed set-up when ordering
* U.S. pricing. International pricing is 5% higher. |
