 |
|
|
 |
|
NEW Lambda TLED
The Lambda TLED is a stand-alone LED light source that can be used with the transmitted light path of a microscope or in other applications with similar requirements.
More about this product
>
|
 |
|
NEW Lambda
VF-5 / VF-1
The new Lambda VF-5™ and Lambda VF-1™
employ the innovative VersaChrome® thin-film filter technology
from Semrock® to provide outstanding bandpass characteristics
such as high transmission (close to 100%), steep edges and out-of-band
blocking. Since these filters pass an image, they are equally suitable
for emission and excitation paths.
More about this product
>
|
 |
|
NEW SMS-120
The SMS-120 is a flat-top microscope stage made for rapid,
repeatable postitioning of slides, chambered slides, multi-well plates,
and other speciman holders. The stage is constructed from the machine
aluminum plates to minimize distortion.
More about this product >
|
 |
|
MOM
MOM - Moveable Objective Microscope
The Movable Objective Microscope (MOM) is a two-photon microscope
capable of imaging deep within living specimans when combined with
a Ti:Saphire laser. The MOM design is unique in providing
3-dimensional objective movement and rotational allowing the
speciman to remain stationary.
More about this product >
|
|
|
|
Lambda DG-4/ DG-5 Plus
The Lambda DG-4/ DG-5 Plus is a complete illumination system offering
speed and versatility for experiments requiring rapid wavelength switching.
New digital servo technology allows faster filter switching and 30% greater
light output than the first generation DG-4/ DG-5. The instrument
retains all the advantages of interference filter based systems, yet
eliminates the temporal constraints imposed by traditional filter changing
devices like filter wheels.
More about this product
>
|
 |
|
NEW
Lambda XL
The new Lambda XL is a broad spectrum light source with an expected bulb life of 10,000 hours -- many times that
of any comparable light source. The output matches that of 300W arc lamps when new and only a loss of 50% is expected
throughout the life of the bulb.
More about this product
>
|
 |
|
Lambda
LS
The Lambda LS is a stand-alone illuminator consisting of
a xenon-arc lamp, lamp housing, cold mirror and power supply in
a single enclosure. The Lambda LS is designed to be used
with a liquid light guide which transmits remarkably flat, intense,
illumination to the optical train of the user’s microscope
or other instrumentation.
More about this product
>
|
 |
|
Lambda 10-3
The Lambda 10-3 is the largest generation of Sutter's high performance
filter wheel changers. The controller now offers faster switching times,
synchronous independent control of 3 filter wheels and 2 shutters (or 2 filter
wheels and 3 shutters), and expanded communication interface options. Recent
advances in motor technology allow the Lambda 10-3 to achieve switching times
of 40msec between adjacent filters. In addition, the controller commands can
now be accessed via USB, serial, parallel, and keypad interfaces.
More about this product
>
|
 |
|
Lambda 10-B
The Lambda 10-B is a high performance, microprocessor-controlled
filter wheel for imaging applications requiring a single filter
wheel. The latest release in Sutter's optical filter changer product
line, the Lambda 10-B uses recent advances in motor technology to
achieve switching times of 40msec between adjacent filters. The
Lambda 10-B is a low cost alternative to the Lambda 10-2 and ideal
for imaging applications requiring only a single filter wheel.
More about this product
>
|
 |
|
Lambda 10-2
The Lambda 10-2 is the ideal choice for researchers whose applications
are intolerant of electrical noise. The low-noise linear electronics of the
controller assure that only DC voltages are present on the motor windings
when the wheels are not moving. The Lambda 10-2 is capable of independently
operating up to two filter wheels and two Uniblitz® shutters.
More about
this product >
|
|
|
|
NEW SmartShutter™
The SmartShutter™ is designed to complement our growing line of optical
products and sets a new standard for shutter performance and reliability.
The SmartShutter™ is designed with only one moving part, which virtually
eliminates the effects of wear and markedly improves performance.
Our improved design uses heat resistant material that performs well
under very high temperature conditions, extending the life of the
shutter.
More about this product
>
|
| |
|
NEW
Lambda SC
SmartShutter™ Controller
The Lambda SC is a full-featured microprocessor controlled shutter
driver for the SmartShutter™. It supports the same shutter
command set used for our other Lambda controllers and offers enhanced
performance through additional of modes of operation. The additional
operating modes allow programmable control over the exposure time,
and the delay between trigger and shutter opening.
More about this product
>
|
 |
|
Microscope
Adapters
Adapters are available for mounting our imaging product line to
the excitation, emission and transmitted light paths of most microscopes.
More
about this product >
|
 |
|
OEM Systems
Customization of our optical product line for unique applications
has become a specialty for Sutter Instrument. Our production facilities
include in-house electronic design, circuit board layout, embedded
systems programming, and state-of-the-art CNC machining and turning
centers for volume production of precision mechanical components.
More
about this product >
|
|
